The camera is suitable for the following models:
EAN: 8594181740999
There are two options for using the rear view camera.
Option 1. DVR camera for viewing behind the car. Install the camera on the rear window using a sticker, run a wire through the interior, connect the wire to the rear-view camera connector.
Option 2. DVR and rear view camera when parking. Install the camera on the rear window inside the car, or outside on the license plate frame. In this case, a voltage of +12 V must be applied when the reverse gear is turned on. This will allow the device to automatically switch the image from the front to the rear camera in parking mode.
Note: It is strongly recommended that the installation of the camera and the connection of the +12 V voltage be carried out by qualified personnel with the necessary skills. Special tools or devices may be required to lay the cable. Make sure that these jobs are safe.
The permissible ambient temperature in the operating mode is from 0 to +35 °C. Storage temperature: from +5 to +45 °C.
Relative humidity: 5% to 90% non-condensing (25 °C).
